QA Tests on x86_64 Hardware
Tester
Install Architecture
Boot Method
Install Method
Install Type
Partitioning
Hardware
- Notes
Tester: Tru
Install Architecture: x86_64 (Intel Core duo 2 T7200)
Boot Method: pxeboot
Install Method: ftp
Install Type: clean install
Partitioning: reuse centos4 partition on laptop
Hardware: Sony Vaio VGN-SZ3XP
Notes: GUI install
xen installed but not really functionnal (Timer ISR/0: Time went backwards flooding, bz upstream)
Tester HuwLynes
Install Architecture x86_64
Boot Method cd-rom
Install Method http
Install Type fresh install
Partitioning reused existing partitons from CentOS4 install, swap / and /data on RAID1 md devices
Hardware Sun X2100 dual Opteron, 4GB RAM, Broadcom gigabit, Nvidia gigabit, dual 120GB SATA drives
- Installed basic server with graphical installer. Grub was set up correctly on the RAID1 which didn't used to happen under CentOS4
Tester HuwLynes
Install Architecture x86_64
Boot Method CD-ROM
Install Method http
Install Type text-mode upgrade of default server CentOS 4.4 install
Partitioning none (upgrade) / on normal partition
Hardware Sun X2100 dual Opteron, 4GB RAM, Broadcom gigabit, Nvidia gigabit, dual 120GB SATA drives
- Upgrade worked, install hangs for several minutes at the end of the install with no feedback, then prompts for re-boot
Tester MichaelBest
Install Architecture x86_64
Boot Method pxeboot
Install Method http
Install Type text-mode
Partitioning previously partitioned MD + LVM setup, installed onto existing md0/md1 partitions
Hardware - AMD64x2 3800 - Asus M2NPV-VM - 4G DDR2 Ram - 3x WD3200SD 320G Western Digital
- Text installer, did package selection, installed text mode only, with virtualization as my kernel choice. In the text installer it didn't appear that I could get a detailed package selection other than by the groups, didn't go right down to the individual package level, I may have missed an option.
