[FrontPage] [TitleIndex] [WordIndex

This is a read-only archived version of wiki.centos.org

Installing Nagios on CentOS 4.x/5.x

<!> Note added 28 Jul 2010: This piece seems to be abandoned, is unmaintained, and refers to only one of the nagios versions in circulation. Supplemented: 11 Oct 2012 It needs a re-write out of the conversational style

<<TableOfContents: execution failed [Argument "maxdepth" must be an integer value, not "[2]"] (see also the log)>>

This document will breeze through installing and configuring everything necessary to get Nagios up and running. This will not touch in detail on the actual configuration directives Nagios uses. For that, documentation is readily available from the Nagios website, or available locally after Nagios is installed. I'll be explaining installation through RPMs and yum from Dag's repo (RPMforge), but source is available if you prefer to build your own. Again, documentation for this is readily available. Please see the third-party Repositories section of the CentOS wiki in you don't already know how to enable repos. This also assumes you already have a working e-mail server in your existing network as well. That's how notifications will get sent, and that's beyond the scope of this.

1. System:

2. References:

3. Packages:


4. General Upgrades

A quick note about upgrading. Generally, upgrading is as simple as typing yum update package_name. Just to be on the cautious side, backup your configuration files in /etc before upgrading. Secondly, always read the release notes to make sure configuration files and directives haven't change.

4.1. Upgrading from 2.4

A quick note about upgrading. If you're upgrading from version 2.4 (and previous 2.x version), and you've installed following this guide then a simple yum upgrade will work just fine. As always, it's best to backup any previous configurations before upgrading just in case something goes awry. Also, from release 2.4 to 2.5 the only packages that Dag has re-spun are nagios and nagios-devel.

[me@mymachine ~] yum update nagios nagios-plugins nagios-devel nagios-plugins-nrpe

4.2. Upgrading from 2.5

If you're upgrading from version 2.5 to 2.6, Dag's RPMs had a few quirks. Make sure you backup /etc/nagios before continuing.

[me@mymachine ~] service nagios stop
[me@mymachine ~] cp -ar /etc/nagios /wherever/nagios_2.5_backup
[me@mymachine ~] yum update nagios nagios-plugins nagios-devel nagios-plugins-nrpe

If cgi.cfg, misccommands.cfg, or checkcommands.cfg are missing or saved as .rpmsave or .rpmnew, then just copy them back from your backup that you just created. Otherwise, ignore the error just mentioned because the RPMs have been repaired. Thanks Dag! Also, there is a mistake int he check_linux_raid.pl script in the contributed plugins. This is easily fixed. Again, if you don't have any problems running this plugin, then it was fixed as well. This was brought to my attention from the Nagios mailing list. A user had spooted this and reported things to the packager, so this is probably resolved by now. Anyways, to correct the check_linux_raid.pl:

[me@mymachine ~] vim /usr/lib/nagios/plugins/contrib/check_linux_raid.pl
Comment out line 26:
use strict;
#use lib utils.pm
use utils qw(%ERRORS);

[me@mymachine ~] nagios -v /etc/nagios/nagios.cfg
[me@mymachine ~] service nagios start

5. Set up Apache

Make sure you have Apache installed, then you'll need to quickly configure it if not. Chances are you probably already have some web service running on your machine, but if not, get it running quickly this way.

[me@mymachine ~] yum install httpd
[me@mymachine ~] vim /etc/httpd/conf/httpd.conf

At least edit the server name directive to your IP address within /etc/httpd/conf/httpd.conf. Then turn on Apache, and make sure it's set to start.

[me@mymachine ~] chkconfig httpd on
[me@mymachine ~] service httpd start

Now open up a browser and see if your web server is running: http://localhost (or your IP). You should see the Apache 2 test page. If so, move along.

If you require further assistance with getting Apache going, especially if you have a need to secure the server, then please follow the documentation at http://www.apache.org. This will get your web server up and running quickly, but provides no means of security what-so-ever, I just want to warn you. If you're running completely internal, then it shouldn't be a big deal. Ok, after you get that running, let's install Nagios and start working on setting it up. By default, the RPMs you are going to install automatically create a nagios.conf file for Apache to use. This file is in /etc/httpd/conf.d/nagios.conf.

6. Installation/Configuration

Nagios requires several different packages be installed so that it may perform the magic it does so well. The core is the Nagios package itself. Without the plugins package, though, Nagios won't be able to actually process any checks on your system. The development package obviously contains all the libraries, headers, and document files for developing Nagios. The other optional packages are the NRPE package, and the NSCA (Nagios Service Check Acceptor) which I don't use. You may have use for it, so check out the main site for details. Also, Nagios must run under both the user and group "nagios." The RPM install takes care of this step for you, so there's no need to create the user and group.

[me@mymachine ~] yum install nagios nagios-plugins nagios-plugins-nrpe nagios-devel

It'll go ahead and pull down a few other packages for dependencies as well. That's it for installation. Let's move back over to Apache's side for a bit.

6.1. Configure the Nagios Apache file

Unless you want other options such as SSL configurations or allowing access to the CGI from only certain hosts, then the default nagios.conf file will suit your needs. Here's what it looks like:

ScriptAlias /nagios/cgi-bin "/usr/lib/nagios/cgi"
<Directory "/usr/lib/nagios/cgi">
#       SSLRequireSSL
        Options ExecCGI
        AllowOverride None
        Order allow,deny
        Allow from all
#       Order deny,allow
#       Deny from all
#       Allow from
        AuthName "Nagios Access"
        AuthType Basic
        AuthUserFile /etc/nagios/htpasswd.users
        Require valid-user
Alias /nagios "/usr/share/nagios"
<Directory "/usr/share/nagios">
#       SSLRequireSSL
        Options None
        AllowOverride None
        Order allow,deny
        Allow from all
#       Order deny,allow
#       Deny from all
#       Allow from
        AuthName "Nagios Access"
        AuthType Basic
        AuthUserFile /etc/nagios/htpasswd.users
        Require valid-user

Unless you want other options configured, that's it for now. Let's set up authentication now.

6.2. Set up the password file

If you don't want to use the name "nagiosadmin" simply substitute your name. Remember later on you'll need to use the same name in some CGI configuration settings.

[me@mymachine ~] htpasswd -c /etc/nagios/htpasswd.users nagiosadmin
New password: type_your_password
Re-type new password: re-type_your_password
Adding password for user nagiosadmin

It's also up to you if you'd like to create a "guest" account. The guest account would allow viewers to see various things you specify within Nagios, but it won't give them total access to the CGI interface. For example, viewers could see host status information, but can't schedule downtime for hosts...things like this. If you want a guest account, add the account.

[me@mymachine ~] htpasswd /etc/nagios/htpasswd.users guest
New password: type_your_password
Re-type new password: re-type_your_password
Adding password for user guest

NOTE: Notice I took away the "-c" option. This is the create option. Since you already created the file, make sure any other accounts you add are not with the create option. You'll wipe the file out if you do.

6.3. Set up the CGI file

The next step is to set up the users you just created in the main CGI configuration file. I'm going to assume that you are not using a guest account, and that you have only created one admin "nagiosadmin" account. Also, ensure you have it set up to use authentication. 1 means on, 0 means off.

[me@mymachine ~] cd /etc/nagios
[me@mymachine nagios] vim cgi.cfg







Save this file when you are finished editing it. There are a lot of other optional parameters to change or play with, so have fun customizing the web interface to your liking. Let's test out what you've done so far. Restart Apache and browse to http://localhost/nagios/. You should see your pretty little web interface to Nagios now, after you supply the credentials that you just created. You can browse through the links to the left, but the majority of them won't work because nothing is configured yet.

6.4. Setting up nagios.cfg

Once you start checking around in /etc/nagios, you'll see there are few example configuration files to take a peek at. One being "localhost.cfg." This file uses an all in one approach to configuring the object files later on. I find this confusing, especially if you eventually have a very large network to monitor. Instead, you'll split out the configurations into separate files, which will keep you sane later on. Go ahead and move this file. Previously, the sample files were named "bigger.cfg" and "minimal.cfg" but with Nagios 2.9 it's now just the one file.

[me@mymachine ~] cd /etc/nagios
[me@mymachine nagios] mv localhost.cfg localhost.cfg_org

Now we're going to open up the main Nagios configuration file. This file is basically self-explanatory with the comments inside of it. The short version is as follows. Nagios allows you to specify every configuration from one single file, "localhost.cfg," if so desired. When you have only a few hosts and services to monitor this idea is rational, but when you have tons of items to monitor this is a bad idea. It's going to take you a long time to get used to setting up Nagios to begin with, so do yourself a favor and split out all your files into the categories as mentioned below. Meaning, use a separate file for hosts and hostgroups, a separate file for services and servicegroups, and a separate file for everything else you decide to configure. You'll thank me later. Let's start with the basics needed. The external command options I turn on in order to allow commands to be executed from the CGI web interface.

[me@mymachine nagios] vim nagios.cfg




Go ahead and save the file. Now, for each file that you specified above you'll need to create the file because it doesn't exist within /etc/nagios.

[me@mymachine nagios] touch contactgroups.cfg contacts.cfg hostgroups.cfg hosts.cfg services.cfg timeperiods.cfg
[me@mymachine nagios] chown nagios.nagios contactgroups.cfg contacts.cfg hostgroups.cfg hosts.cfg services.cfg timeperiods.cfg

One last note about this section. If you are planning on using the external commands on the CGI interface (check_external_commands), you might run into a few permissions issues. Please check out the Nagios FAQ interface if you get any errors when you try to run a command on the web interface. The FAQ is located here: http://nagios.sourceforge.net/docs/2_0/commandfile.html

7. Object configuration files

As mentioned, when the configuration files are split up, Nagios reads the data from these files in order for it to process host and service checks across the network. Before I begin, detailed documentation of all of the options for the template based objects are located at the website. This will help get you started though, so let's begin with the timeperiods file. Obviously, you can substitute your options if you want different values.

7.1. Timeperiods

[me@mymachine nagios] vim timeperiods.cfg

# '24x7' timeperiod definition
define timeperiod{
        timeperiod_name 24x7
        alias           24 Hours A Day, 7 Days A Week
        sunday          00:00-24:00
        monday          00:00-24:00
        tuesday         00:00-24:00
        wednesday       00:00-24:00
        thursday        00:00-24:00
        friday          00:00-24:00
        saturday        00:00-24:00

# 'workhours' timeperiod definition
define timeperiod{
        timeperiod_name workhours
        alias           "Normal" Working Hours
        monday          08:00-17:00
        tuesday         08:00-17:00
        wednesday       08:00-17:00
        thursday        08:00-17:00
        friday          08:00-17:00

# 'nonworkhours' timeperiod definition
define timeperiod{
        timeperiod_name nonworkhours
        alias           Non-Work Hours
        sunday          00:00-24:00
        monday          00:00-09:00,17:00-24:00
        tuesday         00:00-09:00,17:00-24:00
        wednesday       00:00-09:00,17:00-24:00
        thursday        00:00-09:00,17:00-24:00
        friday          00:00-09:00,17:00-24:00
        saturday        00:00-24:00

# 'none' timeperiod definition
define timeperiod{
        timeperiod_name none
        alias           No Time Is A Good Time

You can specify as many of these as you want. For instance, say you have a need to contact folks only on the weekends. You can create a template "weekends" and use only Friday, Saturday, Sunday with the appropriate times as you see fit.

7.2. Contacts/Contacts groups

Contacts are split into two different files. One holds the actual contact options, and the other holds contacts together in groups. The groups are whom you specify Nagios to contact later on.

[me@mymachine nagios] vim contacts.cfg

# service_notification_options are w,u,c,r,f,n
# w=warning u=unknown c=critical r=recovery f=flapping n=none
# host_notification_options d,u,r,f,n
# d=down u=unreachable r=recovery f=flapping n=none

define contact{
        contact_name                    me
        alias                           me
        service_notification_period     24x7
        host_notification_period        24x7
        service_notification_options    c,r
        host_notification_options       d,r
        service_notification_commands   notify-by-email
        host_notification_commands      host-notify-by-email
        email                           me@myemailaddress.whatever

define contact{
        contact_name                    you
        alias                           you
        service_notification_period     workhours
        host_notification_period        workhours
        service_notification_options    c,r
        host_notification_options       d,r
        service_notification_commands   notify-by-email
        host_notification_commands      host-notify-by-email
        email                           you@youremailaddress.whatever

You can choose to do as you wish, but for my purposes I only set contacts up to be notified on critical and recovery alerts. I really have no interest in most things I'm monitoring alerting me when there may be a temporary glitch, or when something is in a warning state, especially at 4:00 a.m. The reason I don't is because a) I frequently check the Nagios CGI interface throughout the day, and b) all of my alerts get forwarded to a ticketing system. With that said, I don't want unnecessary tickets being generated simply because a plugin failed to execute this time around. If I was very inspired, I could set up a separate contact and group to receive only the warning and unknowns, and then pipe these through a different e-mail address. Again, completely adaptive to your needs. Also, I'm using e-mail only. My e-mail system takes care of processing where the alerts are going. However, you could set up nagios to pipe messages straight to pagers. Again, check the object configuration options for timeperiods.cfg on the docs. If you want to see the commands being prosecuted for alerts, check out /etc/nagios/misccommands.cfg. On to the contact groups.

[me@mymachine nagios] vim contactgroups.cfg

# 'einsteins' contact group definitions
define contactgroup{
        contactgroup_name       einsteins
        alias                   einsteins
        members                 me,you

This is a simple example of contacts and contact groups. You can nest as many possibilities as you really want to. You can create as many contacts you need as well. It's rather straightforward.

7.3. Host and host groups

Host and host group information is stored in the two files hosts.cfg and hostgroups.cfg. Just as you can mix and match contacts in various contact groups, you can do the same thing with host names in host groups. I prefer to create template configurations that I can leech off of later on in my configuration file. It saves you an incredible amount of time typing down the road.

[me@mymachine nagios] vim hosts.cfg

# Generic host definitions
define host{
        name                            generic-host    ; Generic template name
        notifications_enabled           1               ; Host notifications are enabled
        event_handler_enabled           1               ; Host event handler is enabled
        flap_detection_enabled          1               ; Flap detection is enabled
        process_perf_data               1               ; Process performance data
        retain_status_information       1               ; Retain status information across program restarts
        retain_nonstatus_information    1               ; Retain non-status information across program restarts
        register                        0               ; DONT REGISTER THIS DEFINITION - ITS NOT A REAL HOST, JUST A TEMPLATE!

# This creates a generic template that any host can use.
# Notifies never, checks 15 times before showing critical on CGI interface,

define host{
        name                    basic-host
        use                     generic-host
        check_command           check-host-alive
        max_check_attempts      15
        notification_interval   0
        notification_period     none
        notification_options    n
        register                0

# This creates a generic host that your routers can use
# monitors host(s) 24x7, notifies on down and recovery, checks 15 times before going critical,
# notifies the contact_group every 30 minutes

define host{
        name                    your-routers-host
        use                     generic-host
        check_command           check-host-alive
        max_check_attempts      15
        notification_interval   30
        notification_period     24x7
        notification_options    d,r
        register                0

define host{
        use                     basic-host
        host_name               mymachine1
        alias                   mymachine1
        contact_groups          einsteins
#       notification_options    d,r  #overrides the basic-host option

define host{
        use                     your-routers-host
        host_name               router1
        alias                   router1
        contact_groups          einsteins

You can begin to see how much time predefined templates can save you down the road when adding hosts. I'm monitoring around 100 hosts and over 200 services, so doing things the template way can really be productive in the long haul. It can get a little confusing, but stick to the docs and you'll learn pretty quickly. When it comes to all of the template object options each file can contain, look for this http://localhost(or your IP)/nagios/docs/configobject.html. This will help you tremendously, because there are so many options Nagios allows you to choose from. I split things up because I want notifications on your-routers-host, but I don't want notification on the basic-host container. If you want to override the basic-host notification container, then just specify it within the host definition itself. Starting to understand why you use templates?

Some people have commented that my logic here is confusing, but it will save you a ton of typing. If you only have a few hosts to be checking on then it probably is overkill. Ok, now on to host groups.

[me@mymachine nagios] vim hostgroups.cfg

define hostgroup{
        hostgroup_name  basic-clients
        alias           basic clients
        members         mymachine1

define hostgroup{
        hostgroup_name  your-routers
        alias           routers
        members         router1

That's about as simple as this can get. You specify your clients from hosts.cfg into host groups in this file. You can split them into multiple groups. For instance, mymachine1 can live within both the basic-clients and your-routers group if you so desired. Pretty simple...

7.4. Services

To start, you're going to need at least one service to monitor. This would be a simple check-host-alive, or ping. Again, you can split things into templates to make it easier down the road just as demonstrated above.

[me@mymachine nagios] vim services.cfg

# Generic service definition template
define service{
        name                            generic-service ; Generic service name
        active_checks_enabled           1               ; Active service checks are enabled
        passive_checks_enabled          1               ; Passive service checks are enabled/accepted
        parallelize_check               1               ; Active service checks should be parallelized (Don't disable)
        obsess_over_service             1               ; We should obsess over this service (if necessary)
        check_freshness                 0               ; Default is to NOT check service 'freshness'
        notifications_enabled           1               ; Service notifications are enabled
        event_handler_enabled           1               ; Service event handler is enabled
        flap_detection_enabled          1               ; Flap detection is enabled
        process_perf_data               1               ; Process performance data
        retain_status_information       1               ; Retain status information across program restarts
        retain_nonstatus_information    1               ; Retain non-status information across program restarts
        register                        0               ; DONT REGISTER THIS DEFINITION - NOT A REAL SERVICE, JUST A TEMPLATE!

# Generic for all services
define service{
        use                             generic-service
        name                            basic-service
        is_volatile                     0
        check_period                    24x7
        max_check_attempts              15
        normal_check_interval           10
        retry_check_interval            2
        notification_interval           0
        notification_period             none
        register                        0

define service{
        use                             basic-service
        name                            ping-service
        notification_options            n
        check_command                   check_ping!1000.0,20%!2000.0,60%
        register                        0

define service{
        use                             ping-service
        service_description             PING
        contact_groups                  einsteins
        hostgroup_name                  basic-clients,your-routers
#       host_name                       one_client

This is the example of how to nest templates. You can use hostgroup_name or host_name individually. I've declared a general template to use called "basic-service" which leeches off of the "generic-service" definitions above that. Then ping-service is used to define it down even lower. The reason I split this out is because say you want to create another host group called "your-switches," but you want notifications to go out on this service to a different contact group. Then you just define another service definition and add this host group to that definition, and apply a different contact group. Ultimately, the last definitions override all other containers above it. Last man standing type deal. The last option Nagios sees, is the one it goes by. For example below. The ping-service is still the same, but I want it to go to a different contact group. Same logic as was explained in the hosts.cfg and hostgroups.cfg file.

define service{
        use                             ping-service
        service_description             PING
        contact_groups                  group2
        hostgroup_name                  your-switches
#       host_name                       one_client

The services.cfg file can get pretty cumbersome because of all the different checks you can configure. For instance, you can set it up to check smtp service through check_smtp, http services through check_http, dhcp, dns, and all sorts of items through SNMP plugins. I'll give you an example of an smtp service check.

# SMTP - ensure SMTP services are available.
define service{
        use                             basic-service
        name                            smtp-service
        service_description             SMTP
        notification_interval           15
        contact_groups                  einsteins
        notification_options            c,r
        notification_period             24x7
        check_command                   check_smtp
        register                        0

define service{
        use                             smtp-service
        hostgroup_name                  smtp-servers
#       host_name                       one_client

Again, obviously this leeches off the template above it, then defines the actual host groups to check. The host group smtp-servers would have to exist in hostgroups.cfg, and there would have to be hosts defined in hosts.cfg.

Before I continue, let me explain a bit as to what actually occurs with these files. Nagios reads the configuration options from all of these text files. When it's time to process the smtp-service you have defined, it looks to see what check_command it's supposed to execute. It then looks in the checkcommands.cfg file to look up what check_smtp is supposed to actually do. This would be:

# 'check_smtp' command definition
define command{
        command_name    check_smtp
        command_line    $USER1$/check_smtp -H $HOSTADDRESS$

Great it says, I've found it! Nagios now knows to go to /usr/lib/nagios/plugins/ (default path for the RPM install) and execute the check_smtp plugin it finds there. It substitutes the $HOSTADDRESS$ with the hosts located in the host groups, goes out and checks the server to see if SMTP is running. It then returns back with a yay or nay, Nagios processes this information according to the options you have laid out in the configuration files, and displays the information on the CGI interface.

This in essence is how to start setting up Nagios. I've simplified this quite a bit, but you should now have a good understand of where to at least begin with configuring hosts and services. Look in /usr/lib/nagios/plugins to see everything you can check out of the box. The list is very large with various things. Also, check out http://www.monitoringexchange.org to view all sorts of third-party plugins written by many community members. I do a lot of checks across SNMP, so be sure to check that out. Also, you can easily write your own plugins to use. There are many extra things you can do within Nagios itself, such as define escalations and extended service/host information. I'll explain that after you get Nagios fired up so you can see what it's about.

8. Starting Nagios

At this point, you should have a working configuration with a host or two for monitoring. Since we haven't done so yet, let's start the Nagios daemon, configure it to start at boot, and check the configurations file for errors.

[me@mymachine nagios] chkconfig nagios on
[me@mymachine nagios] nagios -v nagios.cfg

Nagios 2.4
Copyright (c) 1999-2006 Ethan Galstad (http://www.nagios.org)
Last Modified: 05-31-2006
License: GPL

Reading configuration data...

Running pre-flight check on configuration data...

Total Warnings: 85
Total Errors:   0

Things look okay - No serious problems were detected during the pre-flight check

[me@mymachine nagios] service nagios start

Starting network monitor: nagios

You'll notice my instance has 85 warnings displayed. This is because I have 85 services being checked that have no contact group(s) associated with the service. Warnings are usually ok to let go. As long as the check (nagios -v) says "Things look okay" then you're usually fine. To avoid the warnings, simply do what the warning says and fix the issue it's spewing.

9. Escalations

Escalations are pretty cool in that they allow you to specify where second, third, fourth, and so on, notifications can go. For instance, you have the SMTP service set up to notify a contact group every 30 minutes indefinitely until someone resolves the problem. With an escalation set up, you can tell notifications 2,3,4 to go to this e-mail address, or this pager, and then you can tell notifications 5,6,7 to go to yet another address or pager, and so on. I use this extensively because I have the first notification go to ticketing software, I then set all subsequent notifications to go to simply a pager. I don't want multiple tickets being created by the same incident, but I want Nagios to page the hell out of me until I respond to the event. Let's take a peek. This assumes you've added this in the nagios.cfg file as well as created the file in /etc/nagios.

[me@mymachine nagios] vim escalations.cfg
define serviceescalation{
        host_name               mymachine1
        service_description     SMTP
        first_notification      1
        last_notification       0
        notification_interval   30
        contact_groups          mypager

I define host escalations and service escalations all in the same file as above. You can split these two out just like anything else. Just specify it in the nagios.cfg file to tell the program where the file resides. I don't split these because I don't have too many escalations to really be concerned with. Your mileage may vary.

10. Extended information

Extended information is a bonus feature and is used mainly for just aesthetic reasons on the web interface. It can be split up into host extended information and service extended information. The things you can do with this are put pretty little icons beside host names, specify URL's to links outside of Nagios, and make things look "pretty" on the map systems. I use the service extended information to point to links outside of nagios hosting MRTG graphs. I'll show you how you can do this. Remember to specify this file exists in nagios.cfg and create the file.

[me@mymachine nagios] vim serviceextinfo.cfg
# yum's definitions
define serviceextinfo{
        host_name               yum
        service_description     PING
        notes_url               http://mynagiosbox/mrtg/myfile.html
        icon_image              graph.gif
        icon_image_alt          View graphs

This puts a pretty little icon beside the PING service on the web interface. When you click on this icon, it takes you directly to the MRTG graph I have running on the same machine. In my case, I have an internal yum server rsyncing every night to the mirrors. All of the ethernet traffic is graphed through MRTG, then Nagios points a link to this so it's easy to navigate to. This proves to create a good history of bandwith usage, and other things. Use some creativity and you can log, graph, and link to just about anything you want. For example, processes and users logged into a system.

11. Dependencies

Another interesting file I use is the host and service dependencies options. What this does is set up a tier of checks before something alarms out. For example, I check a login service of a server that's not a Linux box. I have about 15 other services being checked on this host, but they are dependent on being able to login to the machine before processing these checks. When a login is unsuccessful, I don't want 15 services to start freaking out and paging me, so I set up a dependency tree. If login fails, only the login alarms out...I get one notification for this, not a zillion for all the other checks. You can use this feature for hosts as well. Again, specify it in the nagios.cfg file and create the files.

define servicedependency{
        host_name                       your_host
        service_description             LOGIN
        dependent_host_name             your_host
        dependent_service_description   another_service
        execution_failure_criteria      w,u,c
        notification_failure_criteria   w,u,c

The execution failure criteria tells Nagios what it's supposed to do if the "LOGIN" service is down. Meaning "another_service" won't even bother to check the service if login is on a warning, unknown, or critical state. The notification failure criteria determines when notifications should not be sent out. If the login check is in a warning, unknown, or critical status, then no messages will be sent out on another_service.

Just make sure when you are done adding, editing, or creating new configuration files, that you run the nagios -v nagios.cfg option. This processes your configuration files and does a check on them prior to actually refreshing the service.

12. SELinux

A word about SELinux. I don't use it currently, because in 4.x, it messed with some things, and I haven't taken the time to learn it. I know in 5, it's supposed to be much more mature, so try it out. I turned it off when I verified this worked on CentOS 5, so if you run into any strange things, keep SELinux in mind. A security feature of CentOS 5.2 SELinux prevents the access from the apache httpd server to the needed /var/nagios files. A CentOS 5.2 workaround is to execute the command:

chcon -R httpd_sys_content_t /var/nagios

Note: It is also reported that. for CentOS 6, the form: {{{chcon -R --type=httpd_sys_content_t /var/nagios }}} works, in this later CentOS version.

13. That's all, folks!

Basically, this is Nagios summed up. I'm simplifying almost everything. I hope I've explained things in a simple fashion anyways. Documentation for the utility is wonderful, but there's so much documentation that it's hard to learn where to get started sometimes. If you have a network to maintain, I advocate getting Nagios (unless you like other utilities) running to big brother your hosts and devices. It's saved my IT departments' skin on more than one occasion. Like I mentioned before, it'll take you a long time to get good at it, and it's not easy to figure out at first, but once you get a grip on Nagios, you'll wonder how you got along without it before. I'm checking everything from simple pings to check host alive status, to disk usage stats, memory stats, DHCP, DNS, HTTP, temperature in machines rooms, yum updates, cpu loads, SNMP information from hosts, to anything you can imagine. I'm leaving a lot of things out, but you get the idea. Virtually anything you can think of keeping an eye on, you can do so across Nagios. You can write your own plugins, or visit the Monitoring Exchange site I mentioned earlier to find just about anything.

One more thing I would like to mention is the ability to configure and maintain Nagios solely through the web interface. Nagios doesn't come with pre-packaged add-ons for doing so, but you can find information for three different packages here: http://www.nagios.org/faqs/viewfaq.php?faq_id=183. I personally have not used any of them, but I guess for the command line challenged it could prove useful.

If you have anything to add or if you notice something wrong, please let me know so I can correct it. The original is written in HTML, and I have to adapt my formatting to use on this wiki, so there might be some typos. Enjoy.

As MaxHetrick has apparently departed the CentOS Wiki, this page is now presumably fair game for those with edit privileges. This page has been https://www.centos.org/forums/viewtopic.php?p=123452#p123452 as a "clearer" howto.

2023-09-11 07:22