CentOS Linux on the Raspberry Pi 3

32 bit Quick Start

64bit Quick Start

Hardware details

Hardware Status

Device

Status

Notes

Ethernet port

Works

The default image with dhcp on eth0, this is the best route of entry to the new device

HDMI Port

Works

USB Ports

Works

All 4 ports in the front are working

Serial Console

FAIL

The 3 pin gpio hosted console did NOT work for me, needs verification

Serial Console

You should be able to use a Serial USB cable ( also called a TTL Cable ). The pin out assignment needs to be :

pin

role

6

GND

8

Tx0

10

Rx0

Do NOT connect the +5v cable that some of these serial cables also provide.

If you are using the AdaFruit ( or compatible ttl cable ) you can get the pinout details here : https://www.adafruit.com/products/954

Gpio Pin Out

lsusb

# lsusb
Bus 001 Device 002: ID 0424:9514 Standard Microsystems Corp. SMC9514 Hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 001 Device 003: ID 0424:ec00 Standard Microsystems Corp. SMSC9512/9514 Fast Ethernet Adapter

Performance Numbers

openssl speed

OpenSSL 1.0.1e-fips 11 Feb 2013
built on: Fri Jan  8 02:02:57 EST 2016
options:bn(64,32) md2(int) rc4(ptr,char) des(idx,cisc,16,long) aes(partial) idea(int) blowfish(ptr) 
compiler: gcc -fPIC -DOPENSSL_PIC -DZLIB -DOPENSSL_THREADS -D_REENTRANT -DDSO_DLFCN -DHAVE_DLFCN_H -DKRB5_MIT -DTERMIO -Wall -O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -
fstack-protector-strong --param=ssp-buffer-size=4 -grecord-gcc-switches   -march=armv7-a -mfpu=vfpv3-d16  -mfloat-abi=hard -Wa,--noexecstack -DPURIFY -DOPENSSL_BN_ASM_MONT -DOPENSSL_
BN_ASM_GF2m -DSHA1_ASM -DSHA256_ASM -DSHA512_ASM -DAES_ASM -DGHASH_ASM
The 'numbers' are in 1000s of bytes per second processed.
type             16 bytes     64 bytes    256 bytes   1024 bytes   8192 bytes
md2                657.22k     1458.69k     2013.01k     2223.79k     2293.76k
mdc2                 0.00         0.00         0.00         0.00         0.00 
md4               5702.11k    20213.27k    57398.61k   106811.39k   142816.60k
md5               4144.24k    15078.81k    42865.15k    78881.45k   104947.71k
hmac(md5)         4763.34k    16397.50k    45305.69k    80993.96k   105439.23k
sha1              4579.44k    14093.57k    32328.02k    48330.07k    56437.42k
rmd160            3748.89k    11716.42k    26425.43k    38447.45k    44362.41k
rc4              45844.42k    52500.07k    55030.70k    55703.21k    55902.21k
des cbc          12427.77k    13324.99k    13575.77k    13674.15k    13705.22k
des ede3          4814.82k     4951.06k     4987.90k     5002.24k     5008.04k
idea cbc         14230.71k    15470.49k    15800.75k    15899.99k    15930.71k
seed cbc         14507.14k    15345.83k    15601.83k    15715.67k    15750.49k
rc2 cbc           9081.26k     9606.25k     9791.66k     9842.01k     9857.71k
rc5-32/12 cbc        0.00         0.00         0.00         0.00         0.00 
blowfish cbc     18958.47k    21205.06k    21823.83k    22010.54k    22077.44k
cast cbc         17652.25k    19523.48k    20161.02k    20383.06k    20449.96k
aes-128 cbc      25777.95k    28743.45k    29786.45k    30058.84k    30141.10k
aes-192 cbc      22218.29k    24337.54k    25080.83k    25274.03k    25332.39k
aes-256 cbc      19884.99k    21564.65k    22146.65k    22296.92k    22342.31k
camellia-128 cbc    17981.19k    20370.09k    21180.42k    21396.82k    21460.31k
camellia-192 cbc    14702.39k    16252.48k    16765.01k    16493.91k    14742.87k
camellia-256 cbc    14704.38k    16254.78k    16766.21k    16903.17k    16943.79k
sha256            6712.67k    16709.53k    30397.44k    38523.56k    41776.47k
sha512            3909.93k    15783.23k    24396.29k    34441.56k    39209.64k
whirlpool          737.46k     1513.94k     2457.34k     2912.60k     3080.19k
aes-128 ige      23078.09k    26522.54k    27508.91k    27964.76k    28038.49k
aes-192 ige      19148.90k    22374.34k    23474.52k    23773.53k    23857.83k
aes-256 ige      17336.75k    19997.72k    20879.45k    21121.71k    21187.24k
ghash            35036.29k    39795.29k    41665.28k    42160.81k    42308.95k
                  sign    verify    sign/s verify/s
rsa  512 bits 0.001298s 0.000115s    770.5   8660.9
rsa 1024 bits 0.006575s 0.000356s    152.1   2811.2
rsa 2048 bits 0.042638s 0.001293s     23.5    773.4
rsa 4096 bits 0.308485s 0.004970s      3.2    201.2
                  sign    verify    sign/s verify/s
dsa  512 bits 0.001198s 0.001257s    834.7    795.7
dsa 1024 bits 0.003531s 0.004006s    283.2    249.6
dsa 2048 bits 0.012639s 0.014793s     79.1     67.6
                              sign    verify    sign/s verify/s
 256 bit ecdsa (nistp256)   0.0015s   0.0075s    650.3    133.5
 384 bit ecdsa (nistp384)   0.0034s   0.0173s    297.4     57.9
 521 bit ecdsa (nistp521)   0.0069s   0.0387s    144.4     25.8
                              op      op/s
 256 bit ecdh (nistp256)   0.0063s    158.2
 384 bit ecdh (nistp384)   0.0145s     68.9
 521 bit ecdh (nistp521)   0.0322s     31.1

dmesg

# dmesg

[    0.000000] Booting Linux on physical CPU 0x0
[    0.000000] Initializing cgroup subsys cpuset
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Initializing cgroup subsys cpuacct
[    0.000000] Linux version 4.1.18-v7+ (dc4@dc4-XPS13-9333) (gcc version 4.9.3 (crosstool-NG crosstool-ng-1.22.0-88-g8460611) ) #848 SMP Mon Feb 29 14:19:45 GMT 2016
[    0.000000] CPU: ARMv7 Processor [410fd034] revision 4 (ARMv7), cr=10c5383d
[    0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
[    0.000000] Machine: BCM2709
[    0.000000] cma: Reserved 8 MiB at 0x3a800000
[    0.000000] Memory policy: Data cache writealloc
[    0.000000] On node 0 totalpages: 241664
[    0.000000] free_area_init_node: node 0, pgdat 80876f80, node_mem_map b9fa6000
[    0.000000]   Normal zone: 2124 pages used for memmap
[    0.000000]   Normal zone: 0 pages reserved
[    0.000000]   Normal zone: 241664 pages, LIFO batch:31
[    0.000000] [bcm2709_smp_init_cpus] enter (9420->f3003010)
[    0.000000] [bcm2709_smp_init_cpus] ncores=4
[    0.000000] PERCPU: Embedded 12 pages/cpu @b9f71000 s20416 r8192 d20544 u49152
[    0.000000] pcpu-alloc: s20416 r8192 d20544 u49152 alloc=12*4096
[    0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 239540
[    0.000000] Kernel command line: dma.dmachans=0x7f35 bcm2708_fb.fbwidth=592 bcm2708_fb.fbheight=448 bcm2709.boardrev=0xa02082 bcm2709.serial=0x738fbdef smsc95xx.macaddr=B8:27:EB:8F:BD:EF bcm2708_fb.fbswap=1 bcm2709.uart_clock=48000000 vc_mem.mem_base=0x3dc00000 vc_mem.mem_size=0x3f000000  dwc_otg.lpm_enable=0 console=ttyS0,115200 console=tty1 root=/dev/mmcblk0p3 rootfstype=ext4 elevator=deadline rootwait
[    0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[    0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[    0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[    0.000000] Memory: 939468K/966656K available (6024K kernel code, 534K rwdata, 1660K rodata, 448K init, 757K bss, 18996K reserved, 8192K cma-reserved)
[    0.000000] Virtual kernel memory layout:
    vector  : 0xffff0000 - 0xffff1000   (   4 kB)
    fixmap  : 0xffc00000 - 0xfff00000   (3072 kB)
    vmalloc : 0xbb800000 - 0xff000000   (1080 MB)
    lowmem  : 0x80000000 - 0xbb000000   ( 944 MB)
    modules : 0x7f000000 - 0x80000000   (  16 MB)
      .text : 0x80008000 - 0x807895a0   (7686 kB)
      .init : 0x8078a000 - 0x807fa000   ( 448 kB)
      .data : 0x807fa000 - 0x8087fac0   ( 535 kB)
       .bss : 0x80882000 - 0x8093f79c   ( 758 kB)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[    0.000000] Hierarchical RCU implementation.
[    0.000000]  Additional per-CPU info printed with stalls.
[    0.000000] NR_IRQS:608
[    0.000000] Architected cp15 timer(s) running at 19.20MHz (phys).
[    0.000000] clocksource arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x46d987e47, max_idle_ns: 440795202767 ns
[    0.000008] sched_clock: 56 bits at 19MHz, resolution 52ns, wraps every 4398046511078ns
[    0.000026] Switching to timer-based delay loop, resolution 52ns
[    0.000238] Console: colour dummy device 80x30
[    0.001269] console [tty1] enabled
[    0.001319] Calibrating delay loop (skipped), value calculated using timer frequency.. 38.40 BogoMIPS (lpj=192000)
[    0.001387] pid_max: default: 32768 minimum: 301
[    0.001706] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes)
[    0.001750] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes)
[    0.002742] Initializing cgroup subsys blkio
[    0.002791] Initializing cgroup subsys memory
[    0.002840] Initializing cgroup subsys devices
[    0.002882] Initializing cgroup subsys freezer
[    0.002932] Initializing cgroup subsys net_cls
[    0.003002] CPU: Testing write buffer coherency: ok
[    0.003088] ftrace: allocating 20309 entries in 60 pages
[    0.048651] missing device node for CPU 0
[    0.048715] missing device node for CPU 1
[    0.048742] missing device node for CPU 2
[    0.048768] missing device node for CPU 3
[    0.048804] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
[    0.048836] [bcm2709_smp_prepare_cpus] enter
[    0.048996] Setting up static identity map for 0x8240 - 0x8274
[    0.050624] [bcm2709_boot_secondary] cpu:1 started (0) 17
[    0.050945] [bcm2709_secondary_init] enter cpu:1
[    0.050990] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
[    0.051364] [bcm2709_boot_secondary] cpu:2 started (0) 18
[    0.051620] [bcm2709_secondary_init] enter cpu:2
[    0.051643] CPU2: thread -1, cpu 2, socket 0, mpidr 80000002
[    0.051999] [bcm2709_boot_secondary] cpu:3 started (0) 17
[    0.052184] [bcm2709_secondary_init] enter cpu:3
[    0.052206] CPU3: thread -1, cpu 3, socket 0, mpidr 80000003
[    0.052268] Brought up 4 CPUs
[    0.052344] SMP: Total of 4 processors activated (153.60 BogoMIPS).
[    0.052374] CPU: All CPU(s) started in HYP mode.
[    0.052400] CPU: Virtualization extensions available.
[    0.053097] devtmpfs: initialized
[    0.067266] VFP support v0.3: implementor 41 architecture 3 part 40 variant 3 rev 4
[    0.067519] clocksource jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[    0.068380] pinctrl core: initialized pinctrl subsystem
[    0.068921] NET: Registered protocol family 16
[    0.073955] DMA: preallocated 4096 KiB pool for atomic coherent allocations
[    0.074834] bcm2709.uart_clock = 48000000
[    0.074886] of_platform_populate failed: -22
[    0.076501] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers.
[    0.076549] hw-breakpoint: maximum watchpoint size is 8 bytes.
[    0.076686] Serial: AMBA PL011 UART driver
[    0.076799] dev:f1: ttyAMA0 at MMIO 0x3f201000 (irq = 83, base_baud = 0) is a PL011 rev3
[    0.077169] bcm2835-mbox bcm2835-mbox: mailbox enabled
[    0.139375] bcm2708-dmaengine bcm2708-dmaengine: DMA legacy API manager at f3007000, dmachans=0x7f35
[    0.139447] bcm2708-dmaengine bcm2708-dmaengine: failed to get irq for DMA channel 13
[    0.139497] bcm2708-dmaengine bcm2708-dmaengine: Initialized 8 DMA channels (+ 1 legacy)
[    0.140094] bcm2708-dmaengine bcm2708-dmaengine: Load BCM2835 DMA engine driver
[    0.140144] bcm2708-dmaengine bcm2708-dmaengine: dma_debug:0
[    0.140665] SCSI subsystem initialized
[    0.140851] usbcore: registered new interface driver usbfs
[    0.140948] usbcore: registered new interface driver hub
[    0.141059] usbcore: registered new device driver usb
[    0.141540] raspberrypi-firmware raspberrypi-firmware.0: Attached to firmware from 2016-02-29 14:23
[    0.168484] Switched to clocksource arch_sys_counter
[    0.210037] FS-Cache: Loaded
[    0.210306] CacheFiles: Loaded
[    0.219201] NET: Registered protocol family 2
[    0.220158] TCP established hash table entries: 8192 (order: 3, 32768 bytes)
[    0.220299] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
[    0.220509] TCP: Hash tables configured (established 8192 bind 8192)
[    0.220624] UDP hash table entries: 512 (order: 2, 16384 bytes)
[    0.220692] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[    0.221020] NET: Registered protocol family 1
[    0.221339] RPC: Registered named UNIX socket transport module.
[    0.221371] RPC: Registered udp transport module.
[    0.221399] RPC: Registered tcp transport module.
[    0.221426] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    0.222192] bcm2708_gpio: bcm2708_gpio_probe 8081ea68
[    0.223575] futex hash table entries: 1024 (order: 4, 65536 bytes)
[    0.236874] VFS: Disk quotas dquot_6.6.0
[    0.237176] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[    0.239338] FS-Cache: Netfs 'nfs' registered for caching
[    0.240306] NFS: Registering the id_resolver key type
[    0.240368] Key type id_resolver registered
[    0.240397] Key type id_legacy registered
[    0.242526] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[    0.242697] io scheduler noop registered
[    0.242736] io scheduler deadline registered (default)
[    0.243041] io scheduler cfq registered
[    0.244348] BCM2708FB: allocated DMA memory fac00000
[    0.244400] BCM2708FB: allocated DMA channel 0 @ f3007000
[    0.249294] Console: switching to colour frame buffer device 74x28
[    0.253657] Serial: 8250/16550 driver, 0 ports, IRQ sharing disabled
[    0.255822] vc-cma: Videocore CMA driver
[    0.257204] vc-cma: vc_cma_base      = 0x00000000
[    0.258611] vc-cma: vc_cma_size      = 0x00000000 (0 MiB)
[    0.259975] vc-cma: vc_cma_initial   = 0x00000000 (0 MiB)
[    0.261522] vc-mem: phys_addr:0x00000000 mem_base=0x3dc00000 mem_size:0x3f000000(1008 MiB)
[    0.275647] brd: module loaded
[    0.283831] loop: module loaded
[    0.285920] vchiq: vchiq_init_state: slot_zero = 0xbac80000, is_master = 0
[    0.289988] Loading iSCSI transport class v2.0-870.
[    0.291989] usbcore: registered new interface driver smsc95xx
[    0.293402] dwc_otg: version 3.00a 10-AUG-2012 (platform bus)
[    0.495035] Core Release: 2.80a
[    0.496405] Setting default values for core params
[    0.497774] Finished setting default values for core params
[    0.699513] Using Buffer DMA mode
[    0.700878] Periodic Transfer Interrupt Enhancement - disabled
[    0.702294] Multiprocessor Interrupt Enhancement - disabled
[    0.703719] OTG VER PARAM: 0, OTG VER FLAG: 0
[    0.705162] Dedicated Tx FIFOs mode
[    0.706801] WARN::dwc_otg_hcd_init:1047: FIQ DMA bounce buffers: virt = 0xbac14000 dma = 0xfac14000 len=9024
[    0.709700] FIQ FSM acceleration enabled for :
Non-periodic Split Transactions
Periodic Split Transactions
High-Speed Isochronous Endpoints
[    0.715519] dwc_otg: Microframe scheduler enabled
[    0.715565] WARN::hcd_init_fiq:412: FIQ on core 1 at 0x8040ecc0
[    0.717033] WARN::hcd_init_fiq:413: FIQ ASM at 0x8040f030 length 36
[    0.718504] WARN::hcd_init_fiq:438: MPHI regs_base at 0xbb89a000
[    0.720012] dwc_otg bcm2708_usb: DWC OTG Controller
[    0.721501] dwc_otg bcm2708_usb: new USB bus registered, assigned bus number 1
[    0.724351] dwc_otg bcm2708_usb: irq 32, io mem 0x00000000
[    0.725859] Init: Port Power? op_state=1
[    0.727301] Init: Power Port (0)
[    0.728888] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    0.731757] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.734709] usb usb1: Product: DWC OTG Controller
[    0.736216] usb usb1: Manufacturer: Linux 4.1.18-v7+ dwc_otg_hcd
[    0.737736] usb usb1: SerialNumber: bcm2708_usb
[    0.739918] hub 1-0:1.0: USB hub found
[    0.741423] hub 1-0:1.0: 1 port detected
[    0.743183] dwc_otg: FIQ enabled
[    0.743193] dwc_otg: NAK holdoff enabled
[    0.743201] dwc_otg: FIQ split-transaction FSM enabled
[    0.743232] Module dwc_common_port init
[    0.743495] usbcore: registered new interface driver usb-storage
[    0.745120] mousedev: PS/2 mouse device common for all mice
[    0.747154] bcm2835-cpufreq: min=600000 max=700000
[    0.748952] sdhci: Secure Digital Host Controller Interface driver
[    0.750485] sdhci: Copyright(c) Pierre Ossman
[    0.752193] mmc-bcm2835 mmc-bcm2835.0: mmc_debug:0 mmc_debug2:0
[    0.753745] mmc-bcm2835 mmc-bcm2835.0: DMA channels allocated
[    0.788689] sdhci-pltfm: SDHCI platform and OF driver helper
[    0.791574] ledtrig-cpu: registered to indicate activity on CPUs
[    0.797541] hidraw: raw HID events driver (C) Jiri Kosina
[    0.799325] usbcore: registered new interface driver usbhid
[    0.800869] usbhid: USB HID core driver
[    0.803780] Initializing XFRM netlink socket
[    0.806367] NET: Registered protocol family 17
[    0.809022] Key type dns_resolver registered
[    0.810886] Registering SWP/SWPB emulation handler
[    0.814066] registered taskstats version 1
[    0.815601] vc-sm: Videocore shared memory driver
[    0.816962] [vc_sm_connected_init]: start
[    0.818777] [vc_sm_connected_init]: end - returning 0
[    0.820783] Waiting for root device /dev/mmcblk0p3...
[    0.857543] mmc0: host does not support reading read-only switch, assuming write-enable
[    0.863804] mmc0: new high speed SDHC card at address aaaa
[    0.865613] mmcblk0: mmc0:aaaa SL08G 7.40 GiB 
[    0.868281]  mmcblk0: p1 p2 p3
[    0.938586] Indeed it is in host mode hprt0 = 00021501
[    0.949270] EXT4-fs (mmcblk0p3): recovery complete
[    0.950656] EXT4-fs (mmcblk0p3): mounted filesystem with ordered data mode. Opts: (null)
[    0.953437] VFS: Mounted root (ext4 filesystem) on device 179:3.
[    0.965428] devtmpfs: mounted
[    0.967516] Freeing unused kernel memory: 448K (8078a000 - 807fa000)
[    1.118536] usb 1-1: new high-speed USB device number 2 using dwc_otg
[    1.120179] Indeed it is in host mode hprt0 = 00001101
[    1.318794] usb 1-1: New USB device found, idVendor=0424, idProduct=9514
[    1.321851] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    1.325648] hub 1-1:1.0: USB hub found
[    1.327371] hub 1-1:1.0: 5 ports detected
[    1.435917] NET: Registered protocol family 10
[    1.438812] systemd[1]: Inserted module 'ipv6'
[    1.457687] ip_tables: (C) 2000-2006 Netfilter Core Team
[    1.459444] systemd[1]: Inserted module 'ip_tables'
[    1.464962] random: systemd urandom read with 62 bits of entropy available
[    1.480134] systemd[1]: systemd 219 running in system mode. (+PAM +AUDIT +SELINUX +IMA -APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ -LZ4 -SECCOMP +BLKID +ELFUTILS +KMOD +IDN)
[    1.485520] systemd[1]: Detected architecture arm.
[    1.495000] systemd[1]: Set hostname to <centos-rpi3>.
[    1.608553] usb 1-1.1: new high-speed USB device number 3 using dwc_otg
[    1.708824] usb 1-1.1: New USB device found, idVendor=0424, idProduct=ec00
[    1.712041] usb 1-1.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    1.717925] smsc95xx v1.0.4
[    1.747544] systemd[1]: Configuration file /usr/lib/systemd/system/auditd.service is marked world-inaccessible. This has no effect as configuration data is accessible via APIs without restrictions. Proceeding anyway.
[    1.781876] smsc95xx 1-1.1:1.0 eth0: register 'smsc95xx' at usb-bcm2708_usb-1.1, smsc95xx USB 2.0 Ethernet, b8:27:eb:8f:bd:ef
[    1.844929] systemd[1]: Configuration file /usr/lib/systemd/system/ebtables.service is marked executable. Please remove executable permission bits. Proceeding anyway.
[    1.876247] systemd[1]: Cannot add dependency job for unit display-manager.service, ignoring: Unit display-manager.service failed to load: No such file or directory.
[    1.887844] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[    1.891619] systemd[1]: Starting Arbitrary Executable File Formats File System Automount Point.
[    1.898658] systemd[1]: Created slice Root Slice.
[    1.900614] systemd[1]: Starting Root Slice.
[    1.904739] systemd[1]: Listening on udev Kernel Socket.
[    1.906603] systemd[1]: Starting udev Kernel Socket.
[    1.910693] systemd[1]: Listening on Delayed Shutdown Socket.
[    1.912549] systemd[1]: Starting Delayed Shutdown Socket.
[    1.914551] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[    1.918014] systemd[1]: Starting Forward Password Requests to Wall Directory Watch.
[    1.923861] systemd[1]: Created slice User and Session Slice.
[    1.925622] systemd[1]: Starting User and Session Slice.
[    1.929535] systemd[1]: Listening on Journal Socket.
[    1.931235] systemd[1]: Starting Journal Socket.
[    1.934880] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
[    1.937987] systemd[1]: Starting /dev/initctl Compatibility Named Pipe.
[    1.941962] systemd[1]: Created slice System Slice.
[    1.943689] systemd[1]: Starting System Slice.
[    1.947786] systemd[1]: Starting Journal Service...
[    1.954506] systemd[1]: Mounting Debug File System...
[    1.960705] systemd[1]: Reached target Slices.
[    1.962378] systemd[1]: Starting Slices.
[    1.966693] systemd[1]: Starting Replay Read-Ahead Data...
[    1.973210] systemd[1]: Created slice system-getty.slice.
[    1.974886] systemd[1]: Starting system-getty.slice.
[    1.977037] systemd[1]: Mounted Huge Pages File System.
[    1.981293] systemd[1]: Starting Collect Read-Ahead Data...
[    1.986993] systemd[1]: Reached target Remote File Systems.
[    1.988780] systemd[1]: Starting Remote File Systems.
[    1.992840] systemd-readahead[74]: Bumped block_nr parameter of 179:0 to 20480. This is a temporary hack and should be removed one day.
[    1.995813] systemd[1]: Listening on udev Control Socket.
[    1.997406] systemd[1]: Starting udev Control Socket.
[    2.001735] systemd[1]: Mounting POSIX Message Queue File System...
[    2.007581] systemd[1]: Reached target Encrypted Volumes.
[    2.009405] systemd[1]: Starting Encrypted Volumes.
[    2.014465] systemd[1]: Starting Create list of required static device nodes for the current kernel...
[    2.025285] systemd[1]: Mounted POSIX Message Queue File System.
[    2.028966] systemd[1]: Mounted Debug File System.
[    2.033508] systemd[1]: Started Collect Read-Ahead Data.
[    2.090880] systemd[1]: Started Replay Read-Ahead Data.
[    2.096919] systemd[1]: Started Create list of required static device nodes for the current kernel.
[    2.145058] systemd[1]: Started Journal Service.
[    3.431289] random: nonblocking pool is initialized
[    5.163128] EXT4-fs (mmcblk0p3): re-mounted. Opts: (null)
[    5.341365] bcm2708_spi bcm2708_spi.0: master is unqueued, this is deprecated
[    5.347876] systemd-journald[72]: Received request to flush runtime journal from PID 1
[    5.351214] bcm2708_spi bcm2708_spi.0: SPI Controller at 0x3f204000 (irq 80)
[    5.403514] bcm2708_i2c_init_pinmode(1,2)
[    5.405152] bcm2708_i2c_init_pinmode(1,3)
[    5.407181] bcm2708_i2c bcm2708_i2c.1: BSC1 Controller at 0x3f804000 (irq 79) (baudrate 100000)
[    5.606278] wm8804 1-003b: Failed to read device ID: -5
[    5.608103] wm8804: probe of 1-003b failed with error -5
[    5.612000] pcm512x 1-004d: Failed to reset device: -5
[    5.613735] pcm512x: probe of 1-004d failed with error -5
[    5.616037] pcm512x 1-004c: Failed to reset device: -5
[    5.617711] pcm512x: probe of 1-004c failed with error -5
[    5.656404] Adding 524284k swap on /dev/mmcblk0p2.  Priority:-1 extents:1 across:524284k SSFS
[    5.669669] FAT-fs (mmcblk0p1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
[    6.810127] nf_conntrack version 0.5.0 (14814 buckets, 59256 max)
[    6.848279] ip6_tables: (C) 2000-2006 Netfilter Core Team
[    6.997944] Ebtables v2.0 registered
[    7.035149] bridge: automatic filtering via arp/ip/ip6tables has been deprecated. Update your scripts to load br_netfilter if you need this.
[    8.005832] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[    8.060701] smsc95xx 1-1.1:1.0 eth0: hardware isn't capable of remote wakeup
[    8.063831] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[    9.591356] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[    9.595212] smsc95xx 1-1.1:1.0 eth0: link up, 100Mbps, full-duplex, lpa 0xC5E1

SpecialInterestGroup/AltArch/Arm32/RaspberryPi3 (last edited 2016-07-12 11:22:00 by FabianArrotin)