This document is intended to give you a step by step guide to setting up GlusterFS for the first time. For this tutorial, we will assume you are using CentOS (other distributions and methods can be found in the new user guide, below). We also do not explain the steps in detail here, this guide is just to help you get it up and running as soon as possible. After you deploy GlusterFS by following these steps, we recommend that you read the GlusterFS Admin Guide to learn how to administer GlusterFS and how to select a volume type that fits your needs. Read the GlusterFS New User Guide for a more detailed explanation of the steps we took here. We want you to be successful in as short a time as possible.
If you would like a more detailed walk through with instructions for installing using different methods (in local virtual machines, EC2 and baremetal) and different distributions, then have a look at the Getting Started with GlusterFS guide.
Using Storage SIG Yum Repos
To Use the RPMs from Storage SIG, you need to install the centos-release-gluster RPM as it will provide the required YUM repository files. This RPM is available from CentOS Extras.
Example (for CentOS 7 / x86_64):
# yum install centos-release-gluster
Step 1 – Have at least two nodes
- CentOS 7 on two servers named "server1" and "server2"
- A working network connection
At least two virtual disks, one for the OS installation (sda) and one to be used to serve GlusterFS storage (sdb). This will emulate a real world deployment, where you would want to separate GlusterFS storage from the OS install.
Note: GlusterFS stores its dynamically generated configuration files at /var/lib/glusterd, if at any point in time GlusterFS is unable to write to these files it will at minimum cause erratic behaviour for your system, or worse take your system offline completely. It is advisable to create separate partitions for directories such as /var/log to ensure this does not happen.
Step 2 - Format and mount the bricks
(on both nodes): Note: These examples are going to assume the brick is going to reside on /dev/sdb1.
# mkfs.xfs -i size=512 /dev/sdb1 # mkdir -p /bricks/brick1 # vi /etc/fstab
Add the following:
/dev/sdb1 /bricks/brick1 xfs defaults 1 2
Save the file and exit
# mount -a && mount
You should now see sdb1 mounted at /bricks/brick1
Note: On CentOS 6 , you need to install xfsprogs package to be able to format an XFS file system
# yum install xfsprogs
Step 3 - Installing GlusterFS
(on both servers) Install the software. To install from testing repository:
# yum --enablerepo=centos-gluster*-test install glusterfs-server
Note: Storage SIG is providing the test repos as of now and after some time these packages will move to the stable repo if there are no major issues with them.
Start the GlusterFS management daemon (assuming CentOS 7 in our example, on CentOS 6, service output would be different):
# systemctl enable glusterd ln -s '/usr/lib/systemd/system/glusterd.service' '/etc/systemd/system/multi-user.target.wants/glusterd.service' # systemctl start glusterd # systemctl status glusterd glusterd.service - GlusterFS, a clustered file-system server Loaded: loaded (/usr/lib/systemd/system/glusterd.service; enabled) Active: active (running) since Fri 2015-11-13 10:16:09 CET; 3s ago Process: 25972 ExecStart=/usr/sbin/glusterd -p /var/run/glusterd.pid --log-level $LOG_LEVEL $GLUSTERD_OPTIONS (code=exited, status=0/SUCCESS) Main PID: 25973 (glusterd) CGroup: /system.slice/glusterd.service └─25973 /usr/sbin/glusterd -p /var/run/glusterd.pid --log-level INFO
Storage SIG also provides other ecosystem packages (e.g. Samba) for Gluster. The package details can be found here
Step 4 - Iptables configuration
You can run gluster with iptables rules, but it's up to you to decide how you'll configure those rules. By default, glusterd will listen on tcp/24007 but opening that port isn't enough on the gluster nodes. Each time you add a brick, it will open a new port (that you'll be able to see with "gluster volume status")
Depending on your design, it's probably better to have dedicated NIC for the gluster/storage traffic, and so "trust" that nic/subnet/gluster nodes through your netfilter solution (/etc/sysconfig/iptables for CentOS 6, and firewalld/firewall-cmd)
Explaining how to configure iptables is out-of-scope here, but you can read useful information on the dedicated IPTables wiki page.
Step 5 - Configure the trusted pool
# gluster peer probe server2
Note: When using hostnames, the first server needs to be probed from one other server to set it's hostname.
# gluster peer probe server1
Note: Once this pool has been established, only trusted members may probe new servers into the pool. A new server cannot probe the pool, it must be probed from the pool.
Step 6 - Set up a GlusterFS volume
On both server1 and server2:
# mkdir /bricks/brick1/gv0
From any single server:
# gluster volume create gv0 replica 2 server1:/bricks/brick1/gv0 server2:/bricks/brick1/gv0 # gluster volume start gv0
Confirm that the volume shows "Started":
# gluster volume info
Note: If the volume is not started, clues as to what went wrong will be in log files under /var/log/glusterfs on one or both of the servers - usually in etc-glusterfs-glusterd.vol.log
Step 7 - Testing the GlusterFS volume
For this step, we will use one of the servers to mount the volume. Typically, you would do this from an external machine, known as a "client". Since using the method here would require additional packages to be installed on the client machine, we will use the servers as a simple place to test first.
# mount -t glusterfs server1:/gv0 /mnt # for i in `seq -w 1 100`; do cp -rp /var/log/messages /mnt/copy-test-$i; done
First, check the mount point:
# ls -lA /mnt | wc -l
You should see 100 files returned. Next, check the GlusterFS mount points on each server:
# ls -lA /bricks/brick1/gv0
You should see 100 per server using the method we listed here. Without replication, in a distribute only volume (not detailed here), you should see about 50 each.
So, that's it, about as fast as it can be shown. Make sure to have a look at the Admin Guide and New User guide to help you get a deeper understanding, but this is a great start to have a place to test things out.
Refer Gluster Community documentation home page for more information.